29 CFR 1926 - OSHA Construction
Subpart CC - Cranes and Derricks in Construction
Data is current as of September 1, 2020
For future updates please install our OSHA Construction App:
Table of Contents:
§1926.1400 - Scope.
§1926.1401 - Definitions.
§1926.1402 - Ground conditions.
§1926.1403 - AssemblyDisassembly - selection of manufacturer or employer procedures.
§1926.1404 - AssemblyDisassembly - general requirements (applies to all assembly and disassembly operations).
§1926.1405 - Disassembly - additional requirements for dismantling of booms and jibs (applies to both the use of manufacturer procedures and employer procedures).
§1926.1406 - AssemblyDisassembly - employer procedures - general requirements.
§1926.1407 - Power line safety (up to 350 kV) - assembly and disassembly.
§1926.1408 - Power line safety (up to 350 kV) - equipment operations.
§1926.1409 - Power line safety (over 350 kV).
§1926.1410 - Power line safety (all voltages) - equipment operations closer than the Table A zone.
§1926.1411 - Power line safety - while traveling under or near power lines with no load.
§1926.1412 - Inspections.
§1926.1413 - Wire rope - inspection.
§1926.1414 - Wire rope - selection and installation criteria.
§1926.1415 - Safety devices.
§1926.1416 - Operational aids.
§1926.1417 - Operation.
§1926.1418 - Authority to stop operation.
§1926.1419 - Signals - general requirements.
§1926.1420 - Signals - radio, telephone or other electronic transmission of signals.
§1926.1421 - Signals - voice signals - additional requirements.
§1926.1422 - Signals - hand signal chart.
§1926.1423 - Fall protection.
§1926.1424 - Work area control.
§1926.1425 - Keeping clear of the load.
§1926.1426 - Free fall and controlled load lowering.
§1926.1427 - Operator qualification and certification.
§1926.1428 - Signal person qualifications.
§1926.1429 - Qualifications of maintenance & repair employees.
§1926.1430 - Training.
§1926.1431 - Hoisting personnel.
§1926.1432 - Multiple-cranederrick lifts - supplemental requirements.
§1926.1433 - Design, construction and testing.
§1926.1434 - Equipment modifications.
§1926.1435 - Tower cranes.
§1926.1436 - Derricks.
§1926.1437 - Floating cranesderricks and land cranesderricks on barges.
§1926.1438 - Overhead & gantry cranes.
§1926.1439 - Dedicated pile drivers.
§1926.1440 - Sideboom cranes.
§1926.1441 - Equipment with a rated hoistinglifting capacity of 2,000 pounds or less.
§1926.1442 - Severability.
Appendix A to Subpart CC of Part 1926 - Standard Hand Signals
Appendix B to Subpart CC of Part 1926 - AssemblyDisassembly: Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement
Appendix C to Subpart CC of Part 1926 - Operator Certification: Written Examination: Technical Knowledge Criteria
In 29 CFR 1926 - Subpart CC 4.20.08Data is current as of September 1, 2020